News

Jiangsu Fulong New Material Co., Ltd. Equipment Transformation Announcement


Release time:

2018-07-18

Jiangsu Fulong New Materials Co., Ltd. currently has four coal-fired kilns that need to be transformed into "coal-to-gas" equipment, including 2 coal-fired high-temperature rotary kilns, 1 medium-temperature coal-fired rotary kiln and 1 coal-fired pusher kiln. The specific parameters of the kilns are as follows:

Jiangsu Fulong New Materials Co., Ltd. currently has four coal-fired kilns that need to be transformed into "coal-to-gas" equipment, including 2 coal-fired high-temperature rotary kilns, 1 medium-temperature coal-fired rotary kiln and 1 coal-fired pusher kiln. The specific parameters of the kilns are as follows:

Main technical parameters of 1. high temperature rotary kiln

1. Outer diameter of drum: φ810mm;

2. Roller material: 310S heat-resistant steel;

3. Original heating method: coal-fired furnace;

4. Heating furnace size: foreign minister 8700mm, furnace length 7980mm;

5. Design temperature of furnace outside the drum: 950 ℃;

6. Material temperature in drum: 650~800 ℃;

7. Inclination angle of drum: 1.45 ° (height difference between both ends of heating furnace is about 210mm);

8. Structure type of heating furnace: external heating;

9. Structural requirements for transformation of rotary kiln: heating furnace and smoke exhaust device shall include furnace body, burner, combustion air/gas pipeline and smoke exhaust device, etc.

10. Rotary kiln monitoring requirements: intelligent instruments equipped with continuous proportional automatic temperature control in each zone of furnace hearth temperature, instrument overtemperature alarm, the system shall be equipped with a touch screen, with data recording/display/storage/modification/download/copy disk printing function.

11, quality assurance: equipment warranty for one year, and on-site training of operators.

Main Technical Parameters of 2. Medium Temperature Rotary Kiln

1. Outer diameter of drum: φ810mm;

2. Roller material: 310S heat-resistant steel;

3. Original heating method: coal-fired furnace;

4. Size of heating furnace: total length 12.50m, length of heating zone 9.80m;

5. Design temperature of furnace outside the drum: 450 ℃;

6. Material temperature in drum: 250~350 ℃;

7. Inclination angle of drum: 1.45 °;

8. Structure type of heating furnace: external heating;

9. Structural requirements for transformation of rotary kiln: heating furnace and smoke exhaust device shall include furnace body, burner, combustion air/gas pipeline and smoke exhaust device, etc.

10. Rotary kiln monitoring requirements: intelligent instruments equipped with continuous proportional automatic temperature control in each zone of furnace hearth temperature, instrument overtemperature alarm, the system shall be equipped with a touch screen, with data recording/display/storage/modification/download/copy disk printing function.

11, quality assurance: equipment warranty for one year, and on-site training of operators.

Main Technical Parameters of 3. Pusher Kiln

1. Total length of pusher kiln: 14.30 m;

2. Length of heating zone: 11.44 m;

3. Original heating method: coal-fired furnace;

4. Design temperature of furnace outside the drum: 900 ℃;

5. Material temperature in drum: 650~750 ℃;

6. Number of heating channels: 4;

7. Structural type of heating furnace: external heating;

8. Structural requirements for push plate transformation: heating furnace and smoke exhaust device shall include furnace body, burner, combustion air/gas pipeline and smoke exhaust device, etc;

9. Monitoring requirements: intelligent instruments equipped with heating furnace hearth temperature zones are equipped with continuous proportional automatic temperature control, instrument overtemperature alarm, the system needs to be equipped with a touch screen, with data recording/display/storage/modification/download/copy disk printing function;

10, quality assurance: equipment warranty for one year, and on-site training operators.

The above equipment will receive the renovation plan from now on (the plan includes technical plan, quotation, construction period and relevant drawings, and relevant personnel of the company can be contacted for on-site inspection).

Person in Charge: Ding Yanbin18837101870

Li Xirong15189681036

Address: No.3 Road, Aotu Science Park, Xuyi County, Huai 'an City, Jiangsu Province

Jiangsu Fulong New Material Co., Ltd.

  2018.07.15